简体|繁體|EN

← Back to Blog · 2026-10-28 · 6 min read · Trading Education

Let’s be honest: most retail traders don’t get wiped out because they couldn’t predict the market. They get wiped out because they sized their positions based on hope rather than math. You see a setup on the Shanghai Futures Exchange (SHFE), your gut tells you it’s a winner, and you throw on three or four lots of rebar because you want to "make up for last month." Then, the market moves 15 points against you in ten minutes. You’re not stopped out by your strategy; you’re stopped out by your account balance.

Trading Chinese commodity futures is not like trading equities. The leverage is real, the volatility is sharp, and the tick values are non-negotiable. If you are treating position sizing as an afterthought, you are gambling, not trading. Today, we’re stripping away the fluff and looking at the hard numbers. We will break down exactly how to calculate risk per trade on rebar contracts, using the actual specifications of the exchange. This isn’t theory; this is the survival kit for anyone wanting to trade rebar or iron ore with precision.

Understanding the Instrument: Rebar Contract Specifications

You cannot calculate risk if you don’t understand the vehicle you are driving. Many traders coming from US futures markets assume every contract works the same way. They don’t. To trade China futures effectively, you must internalize the specific mechanics of the Rebar (RB) contract. Here are the non-negotiable specs you need to know before you place a single order:

Let’s put this into perspective. If rebar is trading at 3,500 CNY/ton, the notional value of one contract is 35,000 CNY (3,500 × 10). With a 10% margin, your initial capital outlay is roughly 3,500 CNY. That sounds manageable, right? But leverage is a double-edged sword. A small move in price translates to a significant percentage change in your equity relative to the margin posted. This is why blind sizing is fatal.

The Error of "Fixed Lot" Trading

The most common mistake among novice traders is fixed-lot sizing. They decide, "I will always trade 2 lots." This method ignores volatility. If the Average True Range (ATR) of rebar expands due to policy news or supply chain disruptions, 2 lots might represent a 5% risk to your account. But if volatility contracts during a holiday period, those same 2 lots might represent only a 1% risk. This inconsistency makes your performance metrics useless and your emotional state unstable.

When you use fixed lots, you are allowing the market to dictate your risk, not your strategy. In Chinese commodity futures, where macroeconomic headlines can cause overnight gaps, this is dangerous. If a policy announcement regarding steel production caps hits the news, rebar can gap 50 points in seconds. If you were sized for a 20-point stop, a 50-point move doesn't just hit your stop; it blows through it. Your account equity takes the hit at the next available price, which could be significantly worse than your intended exit.

Dynamic Position Sizing: The Risk-Based Formula

Professional traders do not start with "how many lots?" They start with "how much money am I willing to lose?" This is the core of professional risk management. Your position size should be derived from your account size, your risk tolerance per trade, and the technical stop-loss level of the specific setup.

Here is the formula you should use for every single trade:

Position Size (Lots) = (Account Balance × Risk % per Trade) / (Distance to Stop in Points × Tick Value)

Let’s break this down with a realistic scenario. Assume you have an account balance of 50,000 CNY. You are a disciplined trader who risks only 1% of your capital on any single trade. That means your maximum dollar risk is 500 CNY (50,000 × 0.01).

You identify a long setup on rebar. The price is 3,500. Your technical analysis (perhaps a swing low or an ATR-based buffer) tells you that if the price breaks below 3,480, the setup is invalid. Therefore, your stop-loss is 20 points away.

Now, do the math:

Since you cannot trade half a lot on SHFE, you round down to 2 lots. This ensures you never exceed your 1% risk threshold. If you rounded up to 3 lots, you would be risking 600 CNY, or 1.2% of your account. Small? Maybe. But over 100 trades, that extra 0.2% per trade compounds into a massive drag on your equity curve.

Adjusting for Volatility: The ATR Filter

Hard stops are good, but they don’t account for market noise. A 20-point stop might be too tight during a high-volatility regime and too wide during a choppy consolidation. To refine your sizing, incorporate the Average True Range (ATR). A common professional approach is to set your stop-loss at 1.5x or 2x the current 14-period ATR.

For example, if the 14-day ATR for rebar is 40 points, a 20-point stop is inside the noise. You will likely get stopped out by random fluctuation before the trend has a chance to develop. In this case, you might widen your stop to 80 points (2x ATR). This increases your risk per lot to 800 CNY (80 points × 10 CNY). With a 500 CNY total risk budget, your position size drops to 0.625 lots. Since you can’t trade fractional lots, you would likely pass on this trade or wait for a tighter setup where the stop can be protected closer to entry.

This logic forces you to respect the market's current state. When volatility is high, your position size automatically shrinks. When volatility is low, your position size can expand. This is how you keep your risk constant while adapting to the environment.

Practical Application: Iron Ore and Correlation

If you are looking to expand beyond rebar, you might consider iron ore (DCE: I). The principles remain identical, but the specs differ. Iron ore contracts are 100 tons per lot, with a tick size of 0.5 CNY/ton. This means the tick value is 50 CNY per lot. The leverage profile is different, and so is the liquidity. Always recalculate your position size for every new instrument. Never assume that "2 lots of rebar" feels the same risk-wise as "2 lots of iron ore." It absolutely does not.

Furthermore, consider correlation. Rebar and iron ore are highly correlated. If you open a long position in rebar and a long position in iron ore, you are not diversifying; you are doubling your exposure to the steel sector. A rigid position sizing rule helps here. If you allocate 1% risk to rebar, you might only allocate 0.5% risk to iron ore if you hold both simultaneously, to keep your total sector exposure within acceptable limits.

Testing Your System in Real Conditions

Knowing the math is half the battle. Executing it under pressure, with real-time data and actual market slippage, is the other half. Many traders calculate their sizes correctly on paper but panic when the drawdown hits. They move stops, add to losers, or oversize revenge trades.

To truly master position sizing, you need to test your rules in an environment that mimics the real market without risking your livelihood. This is where a structured evaluation is crucial. You need to see if your sizing rules hold up when your strategy goes through a drawdown of 5% or 10%. You need to see if you stick to the math when the market is chopping against you for three weeks straight.

You can test your system on a real-data China futures evaluation at XS Select (from $29). It’s a practical way to validate whether your risk management rules are robust enough to survive live market conditions. No fluff, just execution.

Position sizing is not sexy. It doesn’t give you the dopamine hit of a massive win. But it is the only thing that keeps you in the game long enough to find those wins. Respect the tick value, respect the leverage, and let the math dictate your entry size. Everything else is noise.

📈 Put it into practice: reading is cheap — trading is the real test. XS Select offers ¥100K–¥1M RMB simulated evaluations on real Chinese futures data, from $29. Pass and earn a 10x bonus plus a 50% profit share. Take the Challenge →