â Back to Blog · 2026-10-31 · 7 min read · Trading Education
You are staring at the 15-minute chart of Iron Ore futures on the Dalian Commodity Exchange (DCE). The price is ripping higher, breaking a local resistance level. Your finger hovers over the 'Buy' button. Itâs a classic breakout setup. But then, a nagging thought hits you: Where is the big money going?
If you ignore the bigger picture, youâre essentially trading noise. If you only look at the Daily chart, youâre entering with stop-losses so wide they ruin your risk-reward ratio. The solution isnât to pick one timeframe; itâs to marry them. This is multi-timeframe confluence. Specifically, using the Daily chart to define the battlefield and the 15-minute chart to pick your ambush point.
For traders looking to trade rebar, iron ore, or other Chinese commodity futures, this method filters out 80% of the false signals that bleed retail accounts dry. Letâs break down exactly how to build this system, using concrete contract specs and actionable logic, not vague theory.
Why Iron Ore Demands a Top-Down Approach
Iron Ore (contract code: i) is not just another commodity. It is the single most volatile, news-driven, and structurally complex instrument on the DCE. It moves on Chinese steel production quotas, Australian port inventories, and macroeconomic stimulus announcements from Beijing. Because of this, intraday price action is often a direct translation of higher-timeframe sentiment.
When you trade Chinese commodity futures, you are competing against algorithms and institutional desks that are heavily hedged on the Daily and Weekly charts. If you enter a long position on the 15-minute chart while the Daily trend is firmly bearish, you are fighting the tide. You might get a few ticks, but the probability of a reversal is high.
Confluence is about alignment. We want the Daily trend, the intermediate 4-hour structure, and the 15-minute trigger all pointing in the same direction. When they align, the statistical edge shifts in your favor. When they donât, we sit on our hands.
The Daily Chart: Defining the Battlefield
Your Daily chart is not for entry. It is for context. Before you even open the intraday charts, you must answer three questions using the Daily view of Iron Ore futures:
- What is the primary trend? Is price above or below the 50-day Simple Moving Average (SMA)? Is it making higher highs and higher lows?
- Where is the key support/resistance? Identify the most recent swing highs and lows on the Daily chart. These are your "no-go" zones.
- What is the momentum status? Are we in a consolidation range or an expansion phase?
Letâs assume you are looking to go long. You need the Daily chart to show a bullish structure. Price should ideally be pulling back into a support zone or breaking above a previous daily high. If the Daily chart shows a bearish engulfing candle or price is rejecting a major resistance level, you are banned from buying on the lower timeframes. No exceptions.
For example, during the massive industrial rally in 2020-2021, Iron Ore futures saw sustained uptrends. Traders who respected the Daily trend bought pullbacks. Those who tried to short the "too high" levels on the 15-minute chart got run over repeatedly. Context protects capital.
The 15-Minute Chart: Precision Execution
Once you have your Daily bias (e.g., Bullish), you drop down to the 15-minute chart. This is where you execute. The goal here is to minimize your stop-loss distance, thereby maximizing your risk-reward ratio.
You are looking for a correction within the trend. If the Daily trend is up, you wait for the 15-minute chart to dip. You are not chasing breakouts; you are buying dips. Specifically, look for:
- Retest of Structure: Price breaks a 15-minute resistance, then comes back to test it as support.
- Moving Average Bounce: Price touches the 20-period or 50-period EMA on the 15-minute chart and shows rejection wicks.
- RSI Divergence: On a pullback, the RSI makes a higher low while price makes a lower low. This indicates weakening selling pressure.
The 15-minute timeframe is fast enough to get you a tight entry but slow enough to filter out the 1-minute noise and algorithmic spikes. For Iron Ore, volatility is high. A 1-minute chart will shake you out of good trades. The 15-minute chart gives the trade room to breathe.
Contract Specs and Risk Management
You cannot trade effectively if you donât know the math. Here are the critical specs for Iron Ore futures on the Dalian Commodity Exchange (DCE) as of recent standards. Note: Always verify current specs with your broker, as exchanges update margins and rules.
| Spec | Value |
|---|---|
| Contract Code | i (e.g., i2401) |
| Contract Unit | 100 tons per lot |
| Tick Size | 0.5 CNY per ton |
| Tick Value | 50 CNY per tick |
| Trading Hours | Day session + Night session (approx. 9:00-11:30, 13:30-15:00, 21:00-23:00 CST) |
Why does this matter? If you place a stop-loss 10 ticks away, your risk is 500 CNY per contract. If you risk 1% of your account, you need to know your account size. Many retail traders fail because they ignore the tick value. They think a "small" stop is safe, but on Iron Ore, a small stop can be triggered by normal volatility.
A practical rule: Your stop-loss should be placed below the recent 15-minute swing low. If that stop is too wide, reduce your position size. Never widen your stop to fit your position size. That is the fastest way to blow up.
Step-by-Step Entry Logic
Letâs put this into a checklist. If any step fails, you do not trade.
Step 1: Daily Bias Confirmation
Check the Daily chart. Is price above the 20-day and 50-day EMAs? Is the trend structure bullish (higher highs, higher lows)? If yes, you are only allowed to look for Long setups. If no, you are neutral or short-biased.
Step 2: 15-Minute Pullback Identification
Switch to the 15-minute chart. Wait for price to pull back. Do not enter on the spike. Wait for the pullback to stall. Look for a candlestick pattern like a hammer or a bullish engulfing candle forming at a support level (previous high retest, Fibonacci 61.8% retracement, or moving average).
Step 3: Trigger and Entry
Enter when the 15-minute candle closes in the direction of your Daily bias. For example, if you are long, enter when a 15-minute green candle closes above the high of the previous correction candle.
Step 4: Stop Loss Placement
Place your stop-loss 2-3 ticks below the lowest point of the 15-minute pullback. This keeps your risk tight. Given the 50 CNY tick value, ensure this distance fits your risk management plan.
Step 5: Take Profit Strategy
Set a target at the next major resistance level on the 4-hour or Daily chart. Alternatively, use a trailing stop on the 15-minute chart, moving your stop up below each new 15-minute swing low as the price moves in your favor.
Common Pitfalls in Multi-Timeframe Trading
Even with a solid system, traders fail due to psychological errors. Here are the top three traps:
1. Analysis Paralysis
Traders open five different timeframes and get confused. Stick to two: Daily and 15-minute. Adding more charts only adds noise. If the Daily and 15-minute align, take the trade. If they conflict, skip it.
2. Moving Stop-Losses
You enter a long on Iron Ore. Price drops. You think, "Itâs just a wick," and move your stop lower. This is fatal. In Chinese commodity futures, wicks can be brutal due to low liquidity during certain hours or news spikes. Respect your initial stop. If it hits, you were wrong. Accept it.
3. Ignoring the Night Session
Iron Ore trades heavily during the night session (21:00-23:00 CST). This is when Australian and Brazilian news flows hit the market. Volatility often spikes during these hours. If your strategy relies on technical levels, be aware that overnight gaps can invalidate your 15-minute setup. Consider skipping entries during the first 15 minutes of the night session open.
Practical Application: A Hypothetical Scenario
Imagine the Daily chart for Iron Ore shows a strong uptrend. Price recently broke above a consolidation zone at 850 CNY per ton. The Daily 20 EMA is rising.
You drop to the 15-minute chart. Price has surged to 860 and is now pulling back. It drops to 852, testing the previous breakout level (now support). You see a 15-minute hammer candle form at 852, with a long lower wick. The RSI on the 15-minute chart is resetting from overbought levels but hasnât broken down.
This is confluence. Daily trend is up. 15-minute chart shows a rejection of lower prices at a key support level. You enter long at 853. Your stop is at 849 (below the hammer low). Your target is 870 (next resistance).
Risk: 4 ticks (200 CNY). Reward: 17 ticks (850 CNY). Risk-Reward ratio: 1:4.25. Even if you win only 30% of these trades, you are profitable. This is the power of multi-timeframe confluence.
Conclusion: Test Your Edge
Trading Chinese commodity futures like Iron Ore requires discipline, not just intuition. By combining the structural clarity of the Daily chart with the precision of the 15-minute chart, you filter out noise and focus on high-probability setups. Remember, the market doesnât care about your opinion. It only cares about supply, demand, and structure.
But knowing the theory isnât enough. You need to execute it under pressure, with real data and real risk constraints. Many traders struggle to apply these rules because they lack a structured environment to validate their performance. If you want to know if your multi-timeframe strategy holds water, consider testing it in a disciplined environment.
You can evaluate your systemâs viability with a real-data China futures evaluation at XS Select. Starting from $29, it provides a transparent platform to see if your rules survive live market conditions. No fluff, just data. Good luck, and trade safe.