← Back to Blog · 2026-10-30 · 6 min read · Challenge Guide
You are three trades into the morning session on the Shanghai Futures Exchange. The rebar (steel reinforcing bar) contract is chopping violently, fueled by a sudden headline about infrastructure spending. You caught the first leg, took profit, and felt invincible. Then you doubled down on a breakout that failed. Suddenly, your account is down 1.8%. You have 0.2% left before the platform locks you out for the day. The market is still moving. The temptation to "win it back" is a physical itch in your fingers.
This is the reality of trading China futures under a strict daily loss cap. Unlike traditional brokerage accounts where you might be allowed to bleed slowly over weeks, evaluation platforms and disciplined prop firms enforce hard stops. If you hit that 2% limit, you are done. Period. For retail traders aiming to pass a futures evaluation, this constraint is not a hurdle; it is the primary skill you must master. It forces you to trade like a professional risk manager, not a gambler.
Managing a 2% cap requires more than just "being careful." It requires a mathematical approach to position sizing, an understanding of contract specifications, and the psychological discipline to walk away when the math no longer supports your edge. Here is how to survive and thrive within that tight margin.
Understand the Math Before You Place a Trade
The biggest mistake traders make is thinking about their account balance in dollars when placing trades. You must think in risk units. If your account size is $10,000, your daily loss cap of 2% is $200. This is not a suggestion; it is your budget for the day. Every position you open must be sized so that if your stop-loss is hit, you consume a specific, pre-determined portion of that $200.
Most traders fail because they size their positions based on how much profit they want to make, not how much they can afford to lose. In Chinese commodity futures, volatility can be extreme. A single tick move on a high-multiplier contract can wipe out your daily allowance if you are over-leveraged.
To manage this, you need to reverse-engineer your position size. Before you enter a trade on rebar, iron ore, or crude oil, ask yourself three questions:
- What is my exact stop-loss level in price points?
- What is the monetary value of one tick for this specific contract?
- How many contracts can I hold so that
Stop Loss Distance × Tick Value × Contract Size ≤ 0.5% of Account?
Why 0.5%? Because you likely want the flexibility to take three or four valid setups before your day is over. If you risk 2% on a single trade, one loss ends your day. If you risk 0.5%, you have room for error, which is essential in a market as noisy as the Shanghai International Energy Exchange or the Dalian Commodity Exchange.
Know Your Contract Specs: The Hidden Killer
In the US futures market, many traders are familiar with the E-mini S&P 500 or Crude Oil. In China, the contract specifications are different, and misunderstanding them is the fastest way to breach your cap. You cannot apply generic sizing rules to trade rebar or iron ore without doing the specific math for each instrument.
Let’s look at two popular contracts to illustrate the danger of ignoring specs:
Rebar (RB) - Shanghai Futures Exchange (SHFE)
Rebar is highly liquid and popular among retail traders. The contract multiplier is 10 tons per lot. The minimum tick size is 1 RMB per ton. This means one tick is worth 10 RMB (roughly $1.40 USD, depending on exchange rates). If you are trading a small evaluation account, say $5,000, your daily loss cap is $100 (approx. 720 RMB). If you buy 10 lots of rebar, you are risking 100 RMB per tick. A 7-tick adverse move wipes your day. Given that rebar can easily move 10-20 ticks in minutes during volatile sessions, 10 lots is likely too large for a small account. You might be better suited with 1-2 lots, requiring a wider stop but keeping your dollar risk manageable.
Iron Ore (I) - Dalian Commodity Exchange (DCE)
Iron ore is notoriously volatile. The contract multiplier is 100 tons per lot. The tick size is 0.5 RMB per ton. One tick is worth 50 RMB (approx. $7 USD). This is a much larger tick value than rebar. If you trade 2 lots of iron ore, you are risking 100 RMB per tick. A 15-tick move is $105 (approx.). If your stop loss is set logically at 10 ticks, you are risking $70 per lot. On a $5,000 account with a $100 cap, you can only trade 1 lot comfortably if your stop is 10 ticks. If you try to trade 5 lots to "make up for slow profits," you are risking $350 on a single 10-tick stop. You are instantly blown out.
Actionable Rule: Create a cheat sheet for every contract you intend to trade. List the Tick Value in your account currency. Never guess.
Volatility-Adjusted Position Sizing
Fixed position sizing is a relic of the past. To manage a 2% cap effectively, your position size must breathe with the market. When volatility is low, your stops can be tighter, allowing for slightly larger positions. When volatility is high, your stops must widen to avoid noise, which forces you to reduce position size to keep the dollar risk constant.
Use the Average True Range (ATR) indicator to gauge volatility. For example, if the 14-period ATR on the 5-minute chart of crude oil (INE) has doubled compared to last week, your stop loss distance must double. Consequently, your position size must halve to maintain the same dollar risk.
This approach prevents the "volatility trap." Many traders lose their daily cap because they keep the same number of contracts during a news-driven spike. The stop gets hit not because the analysis was wrong, but because the market noise was larger than their stop allowance. By scaling down when ATR expands, you protect your capital during the most dangerous hours of the trading day.
The Psychology of the "Last 0.5%"
There is a specific psychological phenomenon that occurs when you are down 1.5% on a 2% cap. This is the danger zone. Your brain shifts from "opportunity seeking" to "loss aversion." You start seeing setups that aren't there. You widen stops because "it will come back." You increase leverage because "I need a bigger win."
To combat this, implement a hard physical rule: When you reach 75% of your daily loss cap (1.5% loss), you are downgraded to "Observation Mode."
- You are allowed to take trades, but only at 50% of your normal position size.
- You are prohibited from revenge trading. You must take a 15-minute break after every loss in this mode.
- If you lose another 0.25% (reaching 1.75% total loss), you stop trading for the day. No exceptions.
This rule preserves the remaining 0.25% as a buffer for unforeseen slippage or overnight gaps. It also breaks the psychological cycle of chasing. By forcing a smaller size, you reduce the emotional weight of each tick. Often, once the pressure is off, you realize the market isn't offering good setups, and you choose to sit on your hands. Sitting on your hands is a profitable strategy when you are near your cap.
Practical Application: A Step-by-Step Routine
Here is how a disciplined trader manages the cap during a typical trading day on Chinese futures:
1. Pre-Market Analysis (08:45 - 09:00)
Check the previous day's settlement and overnight moves in related global markets (e.g., LME Copper for Shanghai Copper, Brent for INE Crude). Calculate your max daily loss in RMB/USD. Write it down. This is your hard limit.
2. Setup Identification
Identify 2-3 high-probability setups. Do not click "Buy" until you have calculated the risk. Example: "I want to short Iron Ore at 850. My stop is 855. Risk is 5 ticks. Tick value is 50 RMB. Total risk per lot is 250 RMB. My daily cap is 1,000 RMB. I can risk 250 RMB per trade (0.5% of a $10k/$7k equivalent account). Therefore, I trade 1 lot. If I want 2 lots, my stop must be 2.5 ticks, which is too tight. I stick to 1 lot."